Sublimator 30EKS freeze dryer

(0 đánh giá)



18 tháng

Zirbus Sublimator 30EKS freeze dryer

Drying chamber:
Round drying chamber as one chamber system,
The condenser is located in the same chamber.
Dimensions: Ø800mm
Volume: 900l
Material: Stainless steel AISI 316L (1.4404)
Surface finish inside: stained and glass-beaded
Leak rate of empty and dry chamber: <0.05mbar l / sec.
Achievable end vacuum with corresponding vacuum pump: <0.01mbar
Chamber door:
Stainless steel hinged door with glas window.
Including stainless steel door cover
Door seal made of silicone
Door lock manually
Ice condenser:
The ice condenser is located behind the shelves
Final temperature: optionally -45 ° C (B1320050-51) or -75 ° C
Material of the cooling coil: Stainless steel AISI 316L / 316TI
Measurement Technology:
Vacuum sensor: Pirani vacuum sensor
Range 0.001 ... 1000mbar

Temperature sensors:
3 flexible product probes PT100 diameter 4x30mm, silicone cable.
Additional one temperature sensor for surface area and one for condenser
Hardware: Mitsubishi FXN Industrial PLC
Operation: 7 "color touchpanel, Drytec" M "
Drying programs: 20 pieces, freely definable
Program structure:
10 Freezing stages
10 Main drying stages
10 Post-drying stages
Vacuum control:
Automated isolation valve between condensor and vacuum pump for
carrying out a vacuum control.
System setup:
Drying chamber and components are build on one
Stainless steel base frame.
Stainless steel front panel made of AISI304
This front panel is suitable for wall mounting.
In the basic version the freeze dryer is unclad.
Additional paneling is optional (B1320400).
Dimensions, weights:
Width: 1300mm
Length: 1750mm
Height: 1850mm
Weight: approx. 800kg
Power connection: 400V, 3ph., 50Hz,

Ice condensor -45°C

Cooling machine:

Air cooled refrigeration system consisting of a
Reciprocating piston Compressor
Engine power of the compressor: 0.75KW
Refrigerant R449A, GWP1397 approved according to the latest F-gases
Ice condenser:
Cooled surface: 0.5m²
Capacity condensor: 30kg / 24h
Max. condensor capacity: 45kg
Final temperature: -45°C (without load; in vacuum)
Cooling time: + 20°C to -40°C: & lt; 15 minutes
Fast defrosting by hot water or optional with steam (B1320500)
Steam generator not included
Liquid-controlled shelves: -40 ... + 60 ° C
Cooling floor: 1.0°C / min (in the range +20 ...- 30 ° C)
(Only in combination with shelf package B1320110 - with EKS-R shelves:
not freezeable)
Ambient Conditions:
Max. Heat dissipation at the installation area: 5.0KW
Max. Perm. Ambient temperature: 32 ° C
At a room temperature of + 22°C the cooling capacity is reduced
and therefore the performance.


Đánh giá sản phẩm

Bình chọn sản phẩm:

Sản phẩm cùng loại





Online Support



AD 1

Fanpage Facebook

Visitor Statistics

  • Đang online 5
  • Hôm nay 751
  • Hôm qua 512
  • Trong tuần 1,922
  • Trong tháng 1,922
  • Tổng cộng 315,240